Table of Contents
Advertisement
Useful Information
Making/answering calls, intercom
Problem
is displayed.
Noise is heard, sound cuts in
and out.
Sound quality seems to be
getting worse.
The handset does not ring.
I cannot make a call.
50
Cause/solution
R The handset is too far from the hub. Move closer.
R The hub's AC adaptor is not properly connected.
Reconnect AC adaptor to the hub.
R The handset is not registered to the hub. Register it
(page 27).
R You are using the handset or hub in an area with high
electrical interference. Re-position the hub and use the
handset away from sources of interference.
R Move closer to the hub.
R If you use a DSL/ADSL service, we recommend
connecting a filter (contact your DSL/ADSL service
provider) to the telephone line between the hub and the
telephone line socket. Contact your DSL/ADSL provider
for details. (for Australia)
R If you use a DSL/ADSL (JetStream) service, we
recommend that you contact your DSL/ADSL service
provider to have a DSL/ADSL Splitter installed. We do not
recommend the use of generic DSL/ADSL filters. Contact
your DSL/ADSL service provider for details. (for New
Zealand)
R You have registered a handset that is not recommended
(page 4). The clearest sound quality is only possible by
registering the recommended handset.
R The ringer volume is turned off. Adjust the ringer volume
(page 15, 26).
R Night mode is turned on. Turn it off (page 29).
R If you are using a BT double adaptor to connect the unit,
remove the adaptor and connect the unit to the phone
wall socket directly. If the unit operates properly, check or
replace the adaptor. (for New Zealand)
R You dialled a call restricted number (page 31).
R The key lock feature is turned on. Turn it off (page 19).
R The unit is not designed to be used with rotary/pulse
dialling services.
Advertisement
Table of Contents
