Table of Contents
Advertisement
Home Network System Integration
Stopping the alert
When a sensor is triggered, the hub and
handset sound an alert. Use the following
procedure to stop the alert.
1
Press MnN or MeN.
2
Enter the PIN (default: "0000",
page 42). a MOKN
Note:
R By pressing M
N, you can disarm the
alarm system and stop the alert. See
"Arming and disarming the system",
page 41.
Displaying sensor status
The status of each sensor device is shown on
the handset.
1
M
N#801
2
MbN: Select "All Locations" or the
area in which the desired sensor devices
belong to. a MOKN
3
MbN: Select the desired sensor.
R Press M
N to refresh the displayed
information.
4
MeN
Talking notification feature
This feature allows you to get information
about a triggered sensor without looking at the
display. When a sensor is triggered, the
handset can announce the location of the
sensor detected, the sensor name, and the
type of detection. The announcement is heard
before the alert sounds. The default setting is
"On".
1
M
N#809
2
MbN: Select the desired setting. a MOKN
3
MeN
Alert volume
You can adjust the alert volume heard during
At Home mode and Away mode.
– "Alert Volume": The volume of the alert
that sounds when the system is not
42
disarmed within the entry delay time
(page 41).
– "Entry Alert Volume": The volume of
the alert that sounds during the entry delay
time (page 41).
– "Exit Alert Volume": The volume of
alert that sounds during exit delay time
(page 41).
n Changing alert volume
1
For handset:
M
N#803 (At Home) or
M
N#804 (Away)
For hub:
M
N#*803 (At Home) or
M
N#*804 (Away)
2
MbN: Select the desired setting. a MOKN
3
MeN
n Changing entry alert volume
1
For handset:
M
N#808 (At Home) or
M
N#807 (Away)
For hub:
M
N#*808 (At Home) or
M
N#*807 (Away)
2
MbN: Select the desired setting. a MOKN
3
MeN
n Changing exit alert volume
1
For hub:
M
N#805 (Away)
2
MbN: Select the desired setting. a MOKN
3
MeN
Setting/changing the disarm PIN
You must enter the disarm PIN in order to
disarm the alarm system or stop an alert. The
default PIN is "0000". We recommend
changing the disarm PIN.
Important:
R When you change the disarm PIN, please
make note of the new PIN. The unit will not
reveal the PIN to you. If you forget the PIN,
contact an authorised service centre.
1
M
N#810
Advertisement
Table of Contents
