Section 5 - Operation; Operational Terms; Power Switch - Miller Electric 714D Owner's Manual

5-1. Operational Terms

The following is a list of terms and their definitions as they apply to this wire feeder:
General Terms:
Cold Wire Jog
Sequence
Weld Program
Current Detect Override

5-2. Power Switch

1 Power Switch
OM-1500-1 Page 16
SECTION 5 – OPERATION
Feeding wire without contactor or gas valve being energized.
A portion of the weld program, such as preflow, run-in, start, weld, crater, burnback, and postflow.
A group of sequences that make up a weld cycle.
Is used to disable run-in when a welding power source is used that doesn't provide current feedback
through the 14-pin receptacle.
1
802 809-A