GAGGIA ANIMA
7.13. CPU board
7.14. Programming access for SSC (Saeco Service Center)
7.15. KYB interface and display
Remove the cover.
Unscrew the screws shown
Loosen the screws slide the
card off the support and
disconnect the electrical
connections.
Unscrew the screw shown Press the sides and remove the cover and
Remove the insert the upper cover
Loosen the screw for
remove the cover.
Remuve the cap, unscrew the screw
shown and remove the steam tube.
dispenser. Insert as before to reassemble the
dispenser in the rail and then the coverage.
07 DISASSEMBLY
Pag. 8/9