Gaggia Anima Service Manual page 35

GAGGIA ANIMA
Page 3 (BU) Page 3 (BU)
Insert the BrewUnit Insert the BrewUnit
The indications BU-P The indications BU-P changes from "N" to "Y".
Note: removing the BrewUnit the indication from "Y" to "N" requires Note: removing the BrewUnit the indication from "Y" to "N" requires
about 2-3 seconds to switch. about 2-3 seconds to switch.
ERROR: Check the BU presence Microswitch and the wiring (JP16).
Close the Door and Dreg Drawer Close the Door and Dreg Drawer
The indication The indication DOOR DOOR change from "N" to "Y"
ERROR: The indication DOOR does not change; check
the Microswitch for the door and the wiring (JP14).
Note: without the Dreg Drawer correctly inserted the DOOR indica-
tion cannot change!
Press Press Z7 Z7 " " " to move to the next screen " to move to the next screen
The machine passes to the Page 3 The machine passes to the Page 3 (BU PAGE)
Start condition Start condition
Press the Z1 button to move the BU to Work Press the Z1 button to move the BU to Work
IMPORTANT NOTE: If the DREGDRAWER is not inserted or the
DOOR is not closed the BU test cannot be performed. If these 2
inputs are not in the right position, a warning message will be
shown and the display turns to red.
When the BU reaches the work position the indication When the BU reaches the work position the indication WORK
es from "N" to "Y", the number of the current is less than 200mA es from "N" to "Y", the number of the current is less than 200mA
(without BU) or 300mA (with BU). (without BU) or 300mA (with BU).
ERROR: The indication ERROR: The indication WORK
the display backlight changes from white to red; Check the work the display backlight changes from white to red; Check the work
microswitch (broken?), the BU motor (blocked?) and the wiring microswitch (broken?), the BU motor (blocked?) and the wiring
(JP16). (JP16).
ERROR: ERROR: ( ( Without BU Without BU) The absorbed current is more than
200mA, the display backlight changes from white to red; check the 200mA, the display backlight changes from white to red; check the
BU and the motor. BU and the motor.
changes from "N" to "Y".
change from "N" to "Y"
(BU PAGE)
WORK doesn't change and remain "N", doesn't change and remain "N",
) The absorbed current is more than
05 TROUBLESHOOTING
WORK chang- chang-
Pag. 4/9