Table of Contents
Advertisement
to use the iv analysis function according to the virtual line based rule
1. Set <iv analysis function> to
<enable>.
2. Set the event rule to <virtual line
based rules>.
3. Click a desired point in the video and
drag it to the end point. Then, the
popup window appears.
4. Select a desired <virtual Line Based
rules>.
• Right : A movement from left to right in the virtual line will be detected.
• Left : A movement from right to left in the virtual line will be detected.
• Both : A movement in any direction in the virtual line will be detected.
5. Click [oK].
To cancel the existing line, right-click on the line and select [Delete] in the context
menu.
6. When done, click [apply (
to use the iv analysis function according to the defined area based rule
1. Set <iv analysis function> to
<enable>.
2. Set the event rule to <Defined area
based rules>.
3. Click a corner point of a desired area in
the video to display the popup window.
4. Select a desired <Defined area Based
rules>.
• Entering : An event where a moving object passes through the defined area and
enters inside will be detected.
• Exiting : An event where a moving object passes through the defined area and
exits outside will be detected.
• Appearing/Disappearing : Detects events of appearing and disappearing objects
in the area specified by the user.
)].
English _75
Advertisement
Table of Contents
