Table of Contents
Advertisement
network connection and setup
Dynamic ip Setup
Dynamic ip environment Setup
• Example of the Dynamic IP environment
- If a Broadband Router, with cameras connected, is assigned an IP address by the
DHCP server
- If connecting the camera directly to modem using the DHCP protocols
- If IPs are assigned by the internal DHCP server via the LAN
checking the Dynamic ip
1. Run the IP Installer on the user's local
computer.
Cameras allocated with <Dynamic ip>
address are shown in the list.
2. Select a camera from the search result.
3. Click the [manual Set] button and
check the camera's <Dynamic ip>
address.
If you uncheck <DHcp>, you can
change IP to <Static>.
28_ network connection and setup
Advertisement
Table of Contents
