Table of Contents
Advertisement
` to use intelligent video analysis (va)
1. Select an Intelligent Video Analysis
mode.
2. Set <iv analysis function> to
<enable>.
3. Specify the event rules.
4. Set whether you want to use the
overlay or not.
- If you set it to <enable>, the event
rules will be shown on the screen.
5. Select the detection sensitivity of a
moving object.
Set to a lower sensitivity in environments that
`
allow clear distinguishing of objects from
background.
Set to a higher sensitivity otherwise, such as
in a dark place.
6. Specify the object size.
7. Specify whether or not the event area is
displayed.
- If you set it to <on>, the suspect
area where the event occurs will be
marked in a red box.
8. Specify the activation time and
activation condition.
For more information about <Activation time> and <Action>, refer to "Alarm input". (page 71)
`
9. When done, click [apply (
)].
English _73
Advertisement
Table of Contents
