Pro-Form crosswalk 397 User Manual page 8

3. Locate the Upright Wire (63) bundled between
the Base (74) and the Belly Pan (52). Remove
all ties securing the Upright Wire. Route the
Upright Wire into the Base and out of the indi-
cated hole.
Press a Base Cap (70) into each side of the
Base (74).
See the inset drawing. Cut the plastic tie near
the Upright Wire (63). Be careful not to dam-
age the Upright Wire.
4. Identify the Right Upright (76). Have a second
person hold the Right Upright near the
Base (74).
See the inset drawing. Tie the wire tie in the
Right Upright (76) securely around the end of
the Upright Wire (63). Then, insert the Upright
Wire into the lower end of the Right Upright as
you pull the other end of the wire tie through the
Right Upright.
3
52
63
Hole
4
76
63
Wire
Tie
74
8
74
Tie
Ties
Cut
70
63
63
Wire
Tie
76