Exit Menu - Asus P4GD1 User Manual

The message "Password Installed" appears after you set your password
successfully.
To change the user password, follow the same steps as in setting a user
password.
Clear User Password Clear User Password
Clear User Password Clear User Password Clear User Password
Select this item to clear the user password.
Password Check [Setup] Password Check [Setup]
Password Check [Setup] Password Check [Setup] Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the
Setup utility. When set to [Always], BIOS checks for user password both
when accessing Setup and booting the system.
Configuration options: [Setup] [Always]
Boot Sector Virus Protection [Disabled] Boot Sector Virus Protection [Disabled] Boot Sector Virus Protection [Disabled] Boot Sector Virus Protection [Disabled] Boot Sector Virus Protection [Disabled]
Allows you to enable or disable the boot sector virus protection.
Configuration options: [Disabled] [Enabled]
4.7

Exit menu

The Exit menu items allow you to load the optimal or failsafe default values
for the BIOS items, and save or discard your changes to the BIOS items.
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
Pressing <Esc> does not immediately exit this menu. Select one of the
options from this menu or <F10> from the legend bar to exit.
A S U S P 4 G D 1 A S U S P 4 G D 1 A S U S P 4 G D 1
A S U S P 4 G D 1 A S U S P 4 G D 1
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
Select Screen
Select Item
Enter Go to Sub-screen
F1 General Help
F10 Save and Exit
ESC Exit
4 - 3 7 4 - 3 7 4 - 3 7
4 - 3 7 4 - 3 7