Asus P4GD1 User Manual page 117

3. At the bottom of the screen are the navigation keys. These keys allow
you to move through and select from the menu options.
[1]..[5] Select
4. Press the number of your selection or <Esc> to exit.
Auto-configuring a RAID array Auto-configuring a RAID array
Auto-configuring a RAID array Auto-configuring a RAID array Auto-configuring a RAID array
This option allows you to select a supported RAID set for the utility to
automatically configure.
To auto-configure a RAID set:
1. From the IT8212 Setup Utility screen, press <1>. The following screen
appears.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
Setup Array Type as:
RAID Mode................................
Un-used Drive(s).........................
Drive(s) in Array........................
Array Capacity (size in MB)..............
[ , ,Space] Change Option
2. Use the left or right arrow keys or the space bar to select a RAID set.
As you select an option, the screen displays the array configuration of
the RAID based on the number of IDE devices installed.
3. Press <Ctrl+Y> to save your RAID set.
4. Press <Esc> to exit.
A S U S P 4 G D 1 A S U S P 4 G D 1 A S U S P 4 G D 1
A S U S P 4 G D 1 A S U S P 4 G D 1
[ Auto Configuration Menu ]
[ Array Configuration ]
[CTRL-Y] Save
[ESC] Exit
RAID 0
Stripe
4
0
8056
[ESC] Exit
5 - 1 9 5 - 1 9 5 - 1 9
5 - 1 9 5 - 1 9