Miele KM 2014 Operating And Installation Instructions page 28

Cleaning and care
28
To assemble the small, medium and large burners
^ Place the burner head c onto the burner base d so that
the the ignition safety device e, the ignitor f and the
retaining pins g fit into their respective holes in the burner
head.
^ Position the burner cap b onto the burner head c so that
the retaining pins fit into their respective recesses. Gently
twist the burner cap clockwise or anti-clockwise until it
locks into position.
When correctly positioned it will not slide about.
Important: replace parts in the correct order after cleaning.