Switching On - Miele KM 2014 Operating And Installation Instructions

Switching on

In the event of a power cut
^ The control for the burner required must be pressed in and
turned anti-clockwise to the largest flame symbol to switch
on.
Pressing a burner control will automatically create a spark
on all burners. This is normal and no cause for concern.
^ When the flame ignites, keep the control pressed in for
8-10 seconds, and then let it go.
^ If the flame goes out prematurely, turn the control to "ß".
Wait for at least one minute before trying again. If
necessary keep the control pressed in for longer.
^ If the burner does not ignite the second time, turn the
control to "ß", and see "Problem solving guide".
If there is an interruption to the electricity supply the gas can
be ignited with a match.
^ Press in the relevant control and turn it anti-clockwise to the
largest flame symbol.
^ Hold the control pressed in and light the burner with a
match.
^ Keep the control pressed in for a further 8-10 seconds and
then release it.
Operation
21