Terminal Restart [] Key; Terminal Lock [4] Key; Terminal Logon [5] Key; Balance Enquiry/Quote [6] Key - VeriFone HICAPS VX820 User Manual

4.3.3 terminal restart [3] key
The Terminal Restart function () is used
to re-start the terminal.

4.3.4 terminal lock [4] key

The Lock function (4) is used to lock and
unlock your HICAPS terminal to provide
added security. When active the Lock
option prevents all use of the terminal
until the security password is keyed in.
Once the terminal is locked it will be
unusable until your 4-digit terminal
security password is keyed followed by
[SELECT].

4.3.5 terminal logon [5] key

The Terminal Logon Function (5) is used
to logon to the NAB/ HICAPS host or
Medicare host.

4.3.6 balance enquiry/quote [6] key

The Balance Enquiry/Quote function (6)
allows a provider to provide a quotation
to a patient by checking with the patients
Health Fund what they are covered
for. Entering a quote transaction is the
same as for a claim transaction a claim
transaction.

4.3.7 stationary order [7] key

The Stationery Order function (7) is used
to order terminal paper rolls as detailed in
section .6.
4.3.8 reprint [8] key (reprint EFTPOS
and HICAPS transactions)
The Reprint function (8) is used to either
reprint the receipt for the last transaction
or reprint any transaction by entering the
invoice number which is the last six digits
of the RRN number found on receipts.

4.3.9 terminal SW load [9] option

This option should only be used on
advice from the Help Desk.
46
4.4 changing the terminal
security password
The terminal security password is used
to process both EFTPOS Refunds and to
also unlock the terminal for use.
To change the password:
step 1
Press the [FUNCTION] key.
step 2
Enter [9] [0] and press the [SELECT] key.
step 3
Enter your existing 4-digit password
and press the [OK] key.
step 4
Enter a new 4-digit password and
press the [OK] key.