Disabling The Wi-Fi Radio; Removing The Thermostat From A My.aprilaire.com Account; Troubleshooting Wi-Fi Connection - Aprilaire 8810 Owner's Manual

WI-FI MAINTENANCE AND TROUBLESHOOTING

DISABLING THE WI-FI RADIO

To turn off the Wi-Fi radio on the thermostat, enter the Wi-Fi settings menu as described in the Accessing Wi-Fi
Settings Menu section on page 14 . Change the setting for Turn Wi-Fi Radio On/Off to Off and then press
"DONE" will be displayed . This will turn off the Wi-Fi radio, but maintain all network settings . To turn the Wi-Fi radio
back on simply enter the Wi-Fi setting menu and change the setting for Turn Wi-Fi Radio On/Off to On and then press
, "DONE" will be displayed .

REMOVING THE THERMOSTAT FROM A my.aprilaire.com ACCOUNT

The thermostat can only be registered to one my.aprilaire.com account . If you need to remove the thermostat from
an existing account so it can be registered to a new account, it can be done at the thermostat . This may need to be
done for instance if your have purchased a home with the thermostat and need to remove the thermostat from the
previous owner's account and register it to your account . To do this, enter the Wi-Fi settings menu as described in the
Accessing Wi-Fi Settings Menu section on page 14 . Change the setting for Unregister the Thermostat to Yes and then
press twice, "DONE" will be displayed . This will remove the thermostat from any account that it is currently
registered to . Refer to Wi-Fi Thermostat App User Guide and then Start Up on my.aprilaire.com for instructions
on registering the thermostat to a new my .aprilaire .com account .

TROUBLESHOOTING WI-FI CONNECTION

The Wi-Fi connection status is communicated through the use of the radio strength indicator . The following table
describes the various statuses and the corresponding radio bar display .
16
WI-FI MAINTENANCE AND TROUBLESHOOTING
Wi-Fi connection status
Normal Operation .
,
The thermostat Wi-Fi settings have not been entered . Refer
to Wi-Fi Setup on pages 5-6 for instructions for entering the
Wi-Fi settings .
The thermostat cannot connect to the Wi-Fi router . Verify
that the router is functioning properly .
Indicates the thermostat was not configured properly when
connecting to the router . Confirm there is no IP conflict and
repeat Wi-Fi setup . Note: If the thermostat is configured
to work with an Aprilaire account this indicates that the
thermostat cannot connect to the Aprilaire Cloud . Confirm
that the internet connection is working .
There is an internal error with the thermostat Wi-Fi radio .
The thermostat will continue to control the HVAC, but
will not be able to connect to Wi-Fi . Contact an HVAC
professional for repair .
Wi-Fi radio turned off . Refer to the Accessing Wi-Fi Settings
Menu section on page 14 for information about turning the
Wi-Fi radio on .
Radio status indicator
Wi-Fi signal strength is indicated
by the appropriate number of bars .
The frame is displayed and the bars cycle from 0 to 4 .
The frame and all bars
flash on and off .
The display will alternate between displaying the frame
and all bars .
The frame will flash on and off .
Not displayed .
17