Table of Contents
Advertisement
WI-FI SETUP
STEP 3
Configure the thermostat to connect
to the Wi-Fi network.
Open a web browser on your computer or mobile
device . In the browser enter:
http://192 .168 .1 .99/index .html
In the web browser interface select the network you
want to connect the thermostat to, and enter the
network's security credentials .
6
STEP 4
Verify the thermostat is connected
to the Wi-Fi network.
Once all the required information is entered in the
web browser interface, the thermostat will connect to
the Wi-Fi network you selected . After the thermostat
is connected to the Wi-Fi network, the thermostat
will display the radio bars based on the Wi-Fi signal
strength . If the radio bars are not displaying the signal
strength, refer to Troubleshooting Wi-Fi Connection on
pages 15-16 .
Note: If you are not using the thermostat with a home
automation system, but are instead using an Aprilaire
account to communicate with the thermostat, refer
to Wi-Fi Thermostat App User Guide and then
Start Up on my.aprilaire.com for instructions on
connecting to Wi-Fi and registering to an Aprilaire
account . For additional instructions on using the
Aprilaire web and mobile Apps refer to Wi-Fi
Thermostat App User Guide on my.aprilaire.com .
OPERATION & PROGRAMMING
SELECT SYSTEM MODE
(OFF/HEAT/EM-HEAT/COOL/AUTO)
Press
to select:
AUTO: Thermostat automatically selects heating or
cooling depending on the indoor temperature .
OFF: Heating and cooling systems are off .
HEAT: Thermostat controls only the heating system .
COOL: Thermostat controls only the cooling system .
EM-HEAT: Thermostat controls emergency/auxiliary
heat . Heat pump will not operate . (Only for heat pumps
with auxiliary heat .)
CHANGE TEMPERATURE SETTING
Press
or
to adjust the current setting .
In AUTO use
to switch between the HEAT and
COOL setting .
7
Hide quick links:
Advertisement
Table of Contents
