Output Jumper Switches - dbx DriveRack 260 User Manual

Hide thumbs Also See for DriveRack 260:

Table of Contents

Section 5

• To set the program number that will correspond with the index number, press the DATA

wheel. once this is selected, rotate the DATA wheel to select the desired program number.

• Once your program list has been built, press the PROGRAM/CONFIG button to exit.

Program lock means that program numbers below the selected number cannot be overwrit-

ten.

5.1.6 - Page - 8 - Output Jumper Switches

The Utility menu of the 260 DriveRack also provides you with the option of changing the out-

put levels jumpers from 14dB, 22dB and 30dB from the front panel via the Utility menu. These

settings are used by the SETUP Wizard to compute the output gain of the 260. The following

information will walk you through this procedure.

• From Program mode, press the UTILITY button and use the PREV PG and NEXT PG but-

ton to move to the page that appears as follows:

• Rotate the DATA wheel to select the desired output (1-6) to be edited.

• Now press (to select) and rotate the DATA wheel to set the desired output jumper level.

DriveRack™ User Manual

Utilities/Meters

Output Jumpers

Output

Setting

DriveRack

™

Table of Contents

Show Quick Links

Table of Contents