dbx DriveRack 260 User Manual page 32

Section 3
B modules. Note that the same EQ types must be selected to link.
PG and NEXT PG buttons to move through A and B, and then to the next module
screen which will appear something like this:
• You are now in the Pre-Crossover Insert module. The arrow (in correspondence with the
Module 1 or 2 indicators, along with the A and B indicators indicate which module block is
currently selected. Rotate the DATA wheel to select either Wire, AGC, Compressor, AFS,
Noise Gate or Subharmonic Synthesizer. Pressing and then rotating the DATA wheel lets you
link or unlink the A and B modules. Note that the same Effect types must selected to link.
Use the PREV PG and NEXT PG buttons to move through A and B, 1 and 2 and then to
the next module screen which will appear something like this:
• You are now in the Pre-Crossover Delay module. The arrow (in correspondence with the A
and B indicators indicate which module block is currently selected. Rotate the DATA wheel
to select Delay type and time. Pressing and then rotating the DATA wheel lets you link or
unlink the A and B modules. Note that the same Effect types must selected to link. Use the
PREV PG and NEXT PG buttons to move through A and B, and then to the next module
screen which will appear something like this:
• You are now in the Crossover module. The arrow (in correspondence with the with the A
and B indicators indicate which module block is currently selected. Rotate the DATA wheel
to select Crossover type. Pressing and then rotating the DATA wheel lets you select the route
path.
crossover. A stereo crossover can only have A and B routed to its two inputs.Use the PREV
PG and NEXT PG buttons to move through A and B, Outputs 1-6 and then to the next mod-
ule screen which will appear something like this:
24 DriveRack™ User Manual
Configuring the DriveRack™
COMP
Select
Link/Unlink
MONO DLY 1.3
10 ms Unused
Select
Link/Unlink
1X1 FILTER
Select
Route
You can route either Input A, Input B or the summed Input A+B to any mono input
DriveRack
Use the PREV
C N A
F C B
1 2
D A
D B
A
2
A 2
A
3
B 4
A
5
6
A
®
™