Output - dbx DriveRack 260 User Manual

Hide thumbs Also See for DriveRack 260:

Table of Contents

™

DriveRack

Section 4

Detailed Parameters

Noise Level -10 to 10 (Mixer and Router)

Adjusts the overall level of the pink noise generator.

4.12 Output

The output section 480, 481 and 482 DriveRack™ units provide the user with the ability to con-

trol output levels of the unit and adjust phase compensation of loudspeakers within the signal

path. The output level control is located in the signal path before the compressor/limiters; this

means that the compressor/limiter directly affects the output level. The parameters for the

Phase Compensation effect are as follows and are user adjustable. Please refer to section A.9

of the Appendix for a complete output signal routing diagram.

Shift On/Off

This parameter is used to turn the selected output phase parameters on or off. When level is

off, phase is 0

and polarity is positive.

Polarity On/Off

This parameter is used to reverse the polarity of the output signal.

Phase 0 to -175

This parameter sets the amount of phase within the selected output path. The phase is refer-

enced to the upper frequency of the selected output crossover band.

Table of Contents

Show Quick Links

Table of Contents