Foot Platform Angle Adjustment; Quick Release Fasteners - Pride Mobility Quantum 600 Sport Owner's Manual

V . C O M F O R T
Quick Release Fasteners: The foot platform is attached
to the power base with two quick release fasteners. See
figure 21. Each quick release fastener consists of a bolt, a
lever and a nut. See figure 22. The lever has a cam on the
end that allows it to clamp into place. The quick release
fastener has two states: clamped and unclamped. When
the lever is open, the quick release fastener is unclamped.
When the lever is closed, the quick release fastener is
clamped.
To clamp the quick release fastener:
1. Make sure the lever is in the open position.
2. Turn the nut clockwise until it is snug.
3. Rotate the lever until it is in the fully closed position.
NOTE: If the lever will not rotate to the fully closed
position, then turn the nut anticlockwise one-quar-
ter or one-half turn.

Foot Platform Angle Adjustment

You can adjust the angle of the foot platform.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the screw. See
figure 23.
2. Turn the screw to raise or lower the front of the foot
platform.
28
A D J U S T M E N T S
Figure 23. Underside of Foot Platform
www.pridemobility.com
SCREW
Quantum 600 Sport