Power Elevating Seat Installation; Transit Securement System - Pride Mobility Quantum 600 Sport Owner's Manual

Power Elevating Seat Installation

Your power chair may be equipped with the power elevating
seat option. While the seat itself may be any one of the styles
offered for this model, the way the seat base attaches to the
power base is different.
To install the power seat:
l. Place the seat plate interface bracket onto the actuator.
Seefigure 14.
2. Insert screws into the actuator and insert and tighten
the hardware.
3. Place seating system onto the seat plate interface bracket
and secure.
Transit Securement System (Optional)
If your power chair is equipped with a transit securement
system, it is equipped with manufacturer-installed front and
rear securement brackets. If the transit securement system
is rated for occupied use, it will also be equipped with
positioning belt anchoring brackets. See figure 15. Refer to
the supplement provided with your power chair for
information on how to use the transit securement system.
SEAT PLATE INTERFACE BRACKET
ACTUATOR
Figure 14. Power Seat Actuator
Quantum 600 Sport
I V . A S S E M B L Y
www.pridemobility.com
WIRE TIES
Figure 13. Controller Routed on a Contour Seat
POSITIONING BELT
ANCHORING BRACKET
LOCATIONS
Figure 15. Transit System Securement Brackets
SECUREMENT
BRACKETS
(3 OF 4 SHOWN)
23