License Plate Lamp - Chevrolet Chevy Cruze Limited 2016 Owner's Manual

246 Vehicle Care
4. Remove the taillamp assembly
by pulling it straight back.
5. Remove the bulb socket from
the taillamp assembly by
turning it counterclockwise.
6. Install a new bulb into the bulb
socket.
7. Install the bulb socket into the
taillamp assembly by turning it
clockwise.
8. Install the taillamp assembly
and tighten the two screws.
9. Close the two screw covers.

License Plate Lamp

To replace the license plate
lamp bulb:
1. Remove the two screws from
the license plate lamp
assembly.
2. Turn and pull the license plate
lamp assembly down.
3. Turn the bulb socket
counterclockwise and pull
straight out of the lamp
assembly.
4. Remove the bulb by pulling it
straight out of the socket.
5. Push the new bulb into the
socket.
6. Install the bulb socket by
turning clockwise into the
license plate lamp assembly.
7. Replace the license plate lamp
assembly and tightien the two
screws to secure.