Chevrolet Chevy Cruze Limited 2016 Owner's Manual page 157

156 Infotainment System
Listing Stored Numbers
The list command will list all stored
numbers and name tags.
Using the List Command
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Directory.
3. Say Hands Free Calling.
4. Say List.
Making a Call
Calls can be made using the
following commands.
Dial or Call : The dial or call
command can be used
interchangeably to dial a phone
number or a stored name tag.
Digit Dial : This command allows a
phone number to be dialed by
entering the digits one at a time.
Re-dial : This command is used to
dial the last number used on the cell
phone.
Using the Dial or Call
Command
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Dial or Call.
3. Say the entire number without
pausing or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Calling 911 Emergency
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Dial or Call.
3. Say 911.
4. Say Dial or Call.
Using the Digit Dial Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
Clear at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
Verify at any time.
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Digit Dial.
3. Say each digit, one at a time,
that you want to dial. After
each digit is entered, the
system repeats back the digit it
heard followed by a tone. After
the last digit has been entered,
say Dial.
Once connected, the person called
will be heard through the audio
speakers.
Using the Re-dial Command
1. Press / . The system
responds Ready, followed by
a tone.