Storing The Tire Sealant And Compressor Kit - Chevrolet Chevy Cruze Limited 2016 Owner's Manual

280 Vehicle Care
4. Turn the sealant canister (2) so
the inflator filling hose is
aligned with the slot in the
compressor.
5. Lift the sealant canister (2)
from the compressor and
replace with a new sealant
canister. See your dealer for
more information.
To install a new sealant canister:
1. Align the sealant/air hose (7)
with the slot in the air
compressor.
2. Push the sealant canister (2)
down and turn it clockwise.
3. Wrap the sealant/air hose (7)
around the air compressor
channel to stow it in its original
location.
4. Push the air only hose (6) onto
the sealant canister inlet and
push the lever down.
Storing the Tire Sealant
and Compressor Kit
The tire sealant and compressor kit
is located in the trunk, under the
load floor, behind an access panel.
To remove the kit:
1. Open the trunk. See Trunk
0 36.
2. Turn the left knob
counterclockwise and the right
knob clockwise, 90 degrees, at
the same time. Then pull the
access panel rearward and up
to remove it.