Chevrolet Chevy Cruze Limited 2016 Owner's Manual page 222

1. Pull up on the hood release
handle. It is located inside the
vehicle to the left of the
steering column.
2. Go to the front of the vehicle
and push the secondary hood
release handle toward the
driver side of the vehicle.
3. Lift the hood and release the
hood prop from its retainer,
located above the radiator.
Securely place the hood prop
into the slot on the underside of
the hood.
To close the hood:
1. Before closing the hood, be
sure all the filler caps are on
properly. Then, lift the hood to
relieve pressure on the hood
prop. Remove the hood prop
from the slot on the underside
of the hood and return the prop
to its retainer. The prop rod
Vehicle Care
must click into place when
returning it to the retainer to
prevent hood damage.
2. Lower the hood 30 cm (12 in)
above the vehicle and release
it so it fully latches. Check to
make sure the hood is closed
and repeat the process if
necessary.
221