Selecting An Additional Function; Program Sequence Display; At The End Of A Program; Turning Off - Miele 06 868 521 Operating And Installation Instructions

Selecting an additional
function
"Extra drying" can be selected as an
additional function.
^ Select the drying function directly
after a program has been selected
(not with "Rapid", "Rinse" and "Drain").
Drying is phased over 10 minutes. The
total running time of the program
lengthens accordingly.

Program sequence display

The indicator for the active program
sequence lights up during the program.
Recharging
Pre-wash
Wash
Rinse
Dry (optional function)

At the end of a program

At the end of a program the program
sequence indicators and the "Start"
indicator go out. The display shows "0"
and a buzzer sounds for 30 seconds
(factory setting). The buzzer can be
changed (see "Programming special
functions").
^ If desired use the "Display" button to
see the total running time of a
program or the actual temperature.
To turn the buzzer off
^ Turn the program selector to "STOP".
or
^ Open the door.

Turning off

^ Press and release the "On / Off"
button.
Use
25