Miele 06 868 521 Operating And Installation Instructions page 35

7. Buzzer
A buzzer (30 secs) can be set for the
following functions:
– End of program = Buzzer constantly
– Error = Buzzer sounds every other
second
^ Turn the program selector to "STOP".
^ Turn the machine off.
^ Press and hold the "Display" and
"Start" buttons, at the same time turn
the machine on with the "On / Off"
button.
The display shows the current
program status "P...".
The "Fill/Drain" indicator lights.
^ Press the "Extra Drying" button once.
"E01" (programming level 1) is
displayed.
^ Turn the program selector to
"Intensive".
The display shows a figure between
"90" and "93".
"90" = Buzzer turned off
"91" = End of program
"92" = Fault
"93" = All functions / End of program /
Fault (default)
Programming special functions
^ Press "Display" until the desired
function is displayed.
^ Press the "Start" button. "SP" is
displayed.
^ Press the "Start" button again. The
change has been saved.
Value set:
35