Audio Output Specifications - LG SoundPlate LABS40W Owner's Manual

68 Appendi×
Audio Output Specifications
,DMIOUT
Source _, PCM
I
DTSRe_enc0de_3 i Auto*1_2
Dolby Digital PCM 5.1ch DTS Doiby Digital
Dolby Digital Plus PCM 5.1ch DTS Doiby Digital Plus
D01byTrUeHD PCM 5,1ch DTS DolbyTrueHD
DTS PCM 5,1c h DTS DTS
DTS=HD PCM5Jch DTS DTS-HD
Linear PCM 2ch PCM 2ch DTS Linear PCM 2ch
Linear PCM 5,1ch PCM 5.1ch DTS Linear PCM 5.1ch
Linear PCM 7;ich PCM 7.1ch DTS Linear PCM 7.1ch
/
&
"1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [Auto]. (Except LP(.M
(.odec : the output always include interactive
and secondary audio.)
*2 This player automatically selects the HDMI
audio according to the decoding capability
of the connected HDM[ device even though
[Digital Output] option is set to [Auto].
*3 If the [Digital Output] option is set to
[DTS
re-
encode], the audio output is limited to 48 kHz
and 5.1Ch. If:the [Digital Output] option is set
to [r)TS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like
[Auto]).
The audio is outputted up to PCM 48 kHz/16 bit
for MP3AA/MA file and PCM 44.1 kHz/16 bit for
Audio (.D during playback.
With digital audio connection (HDMI OUT),
Disc Menu button sounds of BD-ROM may not
be heard if the [Digital Output] option is set to
[Auto].
If:the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
Multi-channel Digital Surround Sound via
digital connection can only be obtained if your
receiver is equipped with a Digital Multi-channel
decoder.
This setting is not available on the input signal
from an external device.