Table of Contents
Advertisement
Tro_bleshoofir_g
59
Troubleshooting
General
The Power does not turned
on.
The unit does not start
playback.
The connected
USB storage
device is not recognized.
®
®
®
®
®
®
®
®
®
Plug the power cord into the wall outlet securely.
Insert a playable disc. (Check the disc type, color system, and regional
code.)
Insert the disc with the playback
side down.
(.lean the disc.
Cancel the Rating function
or change
the rating level.
Try using different
USB cable, some USB cables may not support
enough
current
for normal
USB operation.
ffyou use an USB extension
cable or USB HUB, the USB devices may
not be recognized.
An USB device which
requires additional
program
installation
when
you have connected
it to a computer
is not supported.
This unit supports
only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
The angle cannot
be changed.
*
Multi-angles
are not recorded
on the DVD Video being
played.
Cannot
play video, photo or
* The files are not recorded
in a format that the unit can play.
audio files.
* The unit does not support
the codec of the video file.
The remote
control does not
* The remote
control
is not pointed
at the remote
sensor of the unit.
work properly.
* The remote
control
is too far from the unit.
There is an obstacle
in the path of the remote
control and the unit.
The batteries
in the remote control
are exhausted.
The unit is plugged
in, but the
power will not turn on or oE
The unit is not operating
normally.
You can reset the unit as follows.
Unplug the power cord, wait at least five seconds, and then plug it in
again.
/
o
o
Advertisement
Table of Contents
