Table of Contents
Advertisement
26
System
Setting
8.
You can listen toTV
sound through
this unit's
speaker automatically
when TV is turned on. TV
and this unit should be connected
with optical
cable.
Settings
Adjust
the setup
settings
You can change
the settings
of the player in the
[Settings]
menu.
1. Press HOME(@).
3
th
Press A to move and press < / > to select [On]
or [Off]. Select [Next] and press ENTER (®).
9.
Check all the settings that you have set in the
previous
steps.
PressENTER (®) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use A / V / < / > to
select _Z)and press ENTER (®).
10. Displays private sound mode guide. PressENTER
(®).
Use < / > to select the [Settings]
and press
ENTER (®).The
[Settings]
menu appears.
Use A / V to select the first setup option, and
press > to move to the second level.
4.
Use A / V to select a second setup option, and
press ENTER (®) to move to the third level.
5.
Use A / V to select a desired setting, and press
ENTER (®) to confirm
your selection.
Advertisement
Table of Contents
