Table of Contents
Advertisement
18
Connecting
-- @
Note
• If your TV does not accept the resolution
you have set on the player, you can set
resolution
to 480p as follows:
1. Press HOME (_,) to disappear
the HOME
menu.
2. Press [] (STOP) for more than 5 seconds.
If you select a resolution
manually and then
connect
the HDMI jack toTV and your TV
does not accept
it, the resolution
setting
is
set to [Auto].
• If you select a resolution
that yourTV
does not accept, the warning
message
will appear. After resolution
change,
if you cannot see the screen, please
wait 20 seconds and the resolution
will
automatically
revert back to the previous
resolution.
• The 1080p video output
flame
rate may
be automatically
set to either 24 Hz or
60 Hz depending
both on the capability
and preference
of the connected
TV and
based on the native video frame rate of:the
content
on the BD-ROM disc.
Advertisement
Table of Contents
