Table of Contents
Advertisement
◆ Adjusting color (SATURATION and HUE)
You can adjust the color of the projected image using the menu (see page 23).
1. Display the IMAGE menu.
2. Select SATURATION or HUE by pressing the
3. Adjust the selected item by pressing the
To exit from the menu:
4. Press the MENU button several times.
SATURATION
Use to adjust the richness of the color in the projected image. Increase this figure by pressing the
this figure by pressing the
• Unavailable when the input source is HDMI or D-SUB source is an RGB signal.
HUE
Use to adjust the tint of the projected image. Increase this figure by pressing the
pressing the
• Available only when the VIDEO or S-VIDEO source is NTSC or 4.43NTSC signal.
◆ Sharpening or softening images (SHARPNESS)
You can adjust the sharpness of the projected image using the menu (see page 23).
1. Display the IMAGE menu.
2. Select SHARPNESS by pressing the
3. Adjust the selected item by pressing the
• Increase this figure by pressing the
image noise.
To exit from the menu:
4. Press the MENU button several times.
◆ LPF (Progressive filter)
You can select whether or not to enable the LPF. This item is normally set to OFF.
Vertical or horizontal streak noise may appear on the projected image depending on the type of the DVD player you use. In such cases, you can
reduce such streak noise by enabling the LPF. However, projected images become softened slightly.
1. Select A/D SETTING in the SIGNAL menu.
2. Press the
3. Press the ENTER button.
4. Press the
5. Press the
To exit from the menu:
6. Press the MENU button several times.
Downloaded from
www.Manualslib.com
button to render a lighter color.
button to render a reddish image.
or
button to render a sharper image, or reduce it by pressing the
or
button to select EXECUTE
or
button to select LPF.
or
button to choose ON or OFF.
manuals search engine
or
button.
or
button.
button to render a greenish image or decrease this figure by
button.
or
button.
EXECUTE
.
CLAMP
POSITION
CLAMP WIDTH
CLAMP WIDTH
VERT. SYNC
LPF
http://www.pureglare.com.au
button to render a richer color or decrease
button to give a softer image with less
0
1
1
OFF
OFF
29
Advertisement
Table of Contents
