Canon iR1020 Series Service Manual page 57

9) Remove the claw [1] at the front, and then release the two hooks [2] using
a flathead screwdriver.
10) Remove right cover [4] in the direction of the arrow, and then detach the
righy cover [4] by releasing the three hooks [3] at the bottom.
[4]
[3]
[1]
[2]
F-2-6
11) Using a nipper, remove the precut portion [1] of the right cover as shown
below.
Smooth the edges of the interface cable hole so that the canle is not damaged.
12) Attach the right cover.
2. Installation of a card reader
1) Remove the screw [1] from the card reader.
[1]
MEMO:
The removed screw will be used later.
Chapter 2
[1]
F-2-7
F-2-8
2-3