Canon iR1020 Series Service Manual page 284

Chapter 17
Use the firmware for the model suitable for the compatible product.
Unit name:
- Main controller: System
- Boot program: Boot
- PCL board: PCL
- CA certificate (distributed only as necessary)
The system software registration program is explained below taking Boot as an example.
[Preparation]
Have the following ready:
- PC in which SSTv3.21 or later is installed (Download a CA certificate of version of SSTv3.31 or higher)
- System CD containing the firmware for the relevant model
[System Software Registration Procedure]
1) Start the PC.
2) Insert the system CD in the PC.
3) Start SST.
4) Click the "Register Firmware" button.
5) Select the drive in which the system CD is inserted, and then click the "SEARCH" button.
6) A list of system software programs contained in the system CD is displayed. Uncheck the checkboxes of unnecessary folders and system software programs, and
then click the "REGISTER" button.
This machine allows two or more system software programs to be register at the same time. However, it does not allow two or more them to be downloaded at the
same time. If two or more software programs need to be upgraded, download them one by one.
17-2
F-17-2
F-17-3