Combination Switch - Mercedes-Benz 2016 GLA Operator's Manual

Exterior lighting
118
Rear fog lamp
The rear fog lamp improves visibility of your
vehicle for the traffic behind in the event of
thick fog. Please take note of the country-
specific regulations for the use of rear fog
lamps.
To switch on the rear fog lamp: turn the
X
SmartKey in the ignition lock to position 2
or start the engine.
Turn the light switch to L or Ã.
X
Press the R button.
X
The yellow R indicator lamp in the
instrument cluster lights up.
To switch off the rear fog lamp: press the
X
R button.
The yellow R indicator lamp in the
instrument cluster goes out.
Parking lamps
! If the battery has been excessively dis-
charged, the parking lamps or standing
lamps are automatically switched off to
enable the next engine start. Always park
your vehicle safely and sufficiently lit
according to legal standards. Avoid the
continuous use of the T parking lamps
for several hours. If possible, switch on the
X right or the W left standing lamp.
To switch on: turn the light switch to T.
X
The green T indicator lamp in the instru-
ment cluster lights up.
Standing lamps
Switching on the standing lamps ensures the
corresponding side of the vehicle is illumina-
ted.
To switch on the standing lamps: the
X
SmartKey should not be in the ignition lock
or it should be in position 0.
Turn the light switch to W (left-hand side
X
of the vehicle) or X (right-hand side of
the vehicle).

Combination switch

Turn signal
High-beam headlamps
:
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
To indicate: press the combination switch
X
beyond the pressure point in the direction
of arrow ; or ?.
High-beam headlamps
To switch on the high-beam headlamps:
X
turn the SmartKey in the ignition lock to
position 2 or start the engine.
Turn the light switch to L or Ã.
X
Press the combination switch beyond the
X
pressure point in the direction of arrow :.
In the à position, the high-beam head-
lamps are only switched on when it is dark
and the engine is running.
The blue K indicator lamp in the instru-
ment cluster lights up when the high-beam
headlamps are switched on.
To switch off the high-beam head-
X
lamps: move the combination switch back
to its normal position.
The blue K indicator lamp in the instru-
ment cluster goes out.