Loading The Vehicle - Mercedes-Benz 2016 GLA Operator's Manual

Table of Contents

Advertisement

Make sure that the SmartKey is in position
X
2 in the ignition lock (
Press = or ; on the steering wheel
X
to select the
Serv.
Press the 9 or : button to select
X
Tire
Pressure.
Press the a button.
X
The multifunction display shows the cur-
rent tire pressure for each tire or the
pressure will be displayed after
driving a few minutes
Press the : button.
X
The multifunction display shows the
Current Pressures as New Reference
Values
message.
If you wish to confirm the restart:
Press the a button.
X
The
Tire Press. Monitor Restarted
message appears in the multifunction dis-
play.
After driving for a few minutes, the system
checks whether the current tire pressures
are within the specified range. The new tire
pressures are then accepted as reference
values and monitored.
If you wish to cancel the restart:
Press the % button.
X
The tire pressure values stored at the last
restart will continue to be monitored.
Radio type approval for the tire pres-
sure monitor
Country
Radio type approval number
USA
FCC ID: MRXMW2433A
FCC ID: MRXGG4
FCC ID: MRXMC34MA4
Canada
IC: 2546A-MW2433A
IC: 2546A-GG4
IC: 2546A-MC34MA4
page 149).
Y
menu.
Tire
message.
Use

Loading the vehicle

Loading the vehicle
Instruction labels for tires and loads
G
WARNING
Overloaded tires can overheat, causing a
blowout. Overloaded tires can also impair the
steering and driving characteristics and lead
to brake failure. There is a risk of accident.
Observe the load rating of the tires. The load
rating must be at least half of the GAWR of
your vehicle. Never overload the tires by
exceeding the maximum load.
Two instruction labels on your vehicle show
the maximum possible load.
(1) The Tire and Loading Information placard
is on the B-pillar on the driver's side. The
Tire and Loading Information placard
shows the maximum permissible number
of occupants and the maximum permis-
sible vehicle load. It also contains details
of the tire sizes and corresponding pres-
sures for tires mounted at the factory.
(2) The vehicle identification plate is on the
B-pillar on the driver's side. The vehicle
identification plate informs you of the
gross vehicle weight rating. It is made up
of the vehicle weight, all vehicle occu-
pants, the fuel and the cargo. You can
also find information about the maximum
gross axle weight rating on the front and
rear axle.
The maximum gross axle weight rating is
the maximum weight that can be carried
by one axle (front or rear axle). Never
exceed the maximum load or the maxi-
mum gross axle weight rating for the
front or rear axle.
351
Z

Advertisement

Table of Contents
loading

Table of Contents