Memory Function - Mercedes-Benz 2016 GLA Operator's Manual

Memory function

112
Calling up a stored parking position set-
ting
Turn the SmartKey to position 2 in the igni-
X
tion lock ( page 149).
Y
Adjust the exterior mirror on the front-
X
passenger side with the corresponding but-
ton ( page 109).
Y
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
about ten seconds after you have disen-
R
gaged reverse gear
if you press button : for the exterior mir-
R
ror on the driver's side
Memory function
Important safety notes
G WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
WARNING
G
When the memory function adjusts the seat,
you and other vehicle occupants – particularly
children – could become trapped. There is a
risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat. If somebody
becomes trapped, immediately release the
memory function position button. The adjust-
ment process is stopped.
WARNING
G
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
The memory function can be used at any time,
e.g. even when the SmartKey isn't in the igni-
tion lock.
Storing settings
With the memory function, you can store up
to three different settings, e.g. for three dif-
ferent people.
The following settings are stored as a single
memory preset:
seat and backrest position
R
driver's side: position of the exterior mir-
R
rors on the driver's and front-passenger
sides
Adjust the seat (
X
Y
Adjust the exterior mirror on the driver's
X
side ( page 109).
Y
Briefly press the M memory button and
X
then press storage position button 1, 2 or 3
within three seconds.
The settings are stored in the selected pre-
set position. A tone sounds when the set-
tings have been completed.
page 105).