Section 5: Installation & Setup; Inspecting The Shipment For Damage; Unpacking The Orbit Ii And Verifying Shipment Contents - MicroBoards Technology Orbit II Reference Manual

Section 5: Installation & Setup
The installation and Setup of a Microboards Technology Orbit II Stand Alone Copying System is so simple
you may be tempted to proceed without referring to this manual. Unless you already use a Microboards
Technology Copying System we suggest that you take the few extra moments required to follow our
recommended unpacking, installation, and Setup procedure. During Orbit II CD-to-CD Copy System Setup
you will learn how to use our menu driven operating system. You will use the control keypad to configure
your Orbit II for basic copying and to determine if the unit has sustained any internal damage during
shipment.

5.1 Inspecting the shipment for Damage

Your Orbit II Disc Copier is supplied in one shipping carton. If the outer carton shows signs of shipping
damage, notify the shipping company immediately. They are responsible for the condition of the shipment.
Contact Microboards Technology Technical Services Group prior to unpacking any equipment that is
received in damaged shipping cartons.
If the shipping cartons do not show any signs of damage, unpack the Orbit II.

5.2 Unpacking the Orbit II and verifying shipment contents

The Orbit II shipping carton should contain the following items:
•
Orbit II Disc Copier
•
Orbit II external Power Supply
•
An AC Power Cord
•
Blank CD-R discs
•
Starter Kit
•
Surething Label Design Software
If any of these items are damaged or missing contact the Microboards Technology Technical Services
Group.
Save all of the Orbit II packaging material. You will need the packing material if you ever move your
Orbit II, or have to send it in for servicing. Returning an Orbit II for servicing without its original
shipping container will void your warranty!
Orbit II Disc Copier Reference Manual – Revision K
9