Troubleshooting - Nikon Coolpix S9900 Quick Start Manual

Hide thumbs Also See for Coolpix S9900:
Table of Contents

Advertisement

Troubleshooting

If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service
representative.
Also, refer to the Reference Manual (PDF format) for further details on how to
use this camera (A2).
Problem
The camera is
on but does not
respond.
The camera
cannot be
turned on.
The camera
turns off
without
warning.
The monitor is
blank.
The camera
becomes hot.
30
Technical Notes
Cause/Solution
Wait for recording to end.
If the problem persists, turn the camera off.
If the camera does not turn off, remove and
reinsert the battery or batteries or, if you are using
an AC adapter, disconnect and reconnect the AC
adapter.
Note that although any data currently being
recorded will be lost, data that have already been
recorded will not be affected by removing or
disconnecting the power source.
The battery is exhausted.
The power switch is enabled a few seconds after
the battery is inserted. Wait a few seconds before
pressing the power switch.
The camera automatically turns off to save power
(auto off function).
The camera and battery may not work properly at
low temperatures.
The inside of the camera has become hot. Leave
the camera off until the inside of the camera has
cooled, and then try turning it on again.
The camera is off.
The camera automatically turns off to save power
(auto off function).
The flash lamp flashes while the flash is charging.
Wait until charging is complete.
The camera is connected to a TV or computer.
The camera and smart device are connected using
Wi-Fi connection and the camera is operated by
remote control.
The camera may become hot when used for an
extended period of time to record movies or send
images, or when used in a hot environment; this is
not a malfunction.
A
8, 9, 27
16
27
12
16
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents