License Plate Lamp; Replacement Bulbs - Chevrolet Impala 2016 Owner's Manual

License Plate Lamp

To replace one of these bulbs:
Passenger Side Shown, Driver
Side Similar
1. Push the lamp assembly
toward the right.
2. Pull the lamp assembly down
to remove.
3. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
4. Pull the bulb (2) straight out of
the bulb socket.
5. Push the replacement bulb
straight into the bulb socket
and turn the bulb socket
clockwise to install it into the
lamp assembly.
6. Push the lamp assembly back
into position until the release
tab locks into place.
Vehicle Care

Replacement Bulbs

Exterior Lamp
Back-Up Lamp
Deck Lid Taillamp
Front Parking/Turn
Signal Lamp PLATINUM
Front
Sidemarker Lamp
High/Low-Beam
Headlamp (Base) (9005SL+)
License Plate Lamp
Stoplamp/Taillamp/
Turn Signal Lamp
For replacement bulbs not listed
here, contact your dealer.
275
Bulb
Number
7440
194
7444 NA
194
HB3
W5W LL
7443 LL