Turn And Lane-Change; Signals; Interior Lighting; Instrument Panel Illumination - Chevrolet Impala 2016 Owner's Manual

Turn and Lane-Change

Signals

Move the lever all the way up or
down to signal a turn.
An arrow on the instrument cluster
flashes in the direction of the turn or
lane change.
Raise or lower the lever until the
arrow starts to flash to signal a lane
change. Hold it there until the lane
change is completed. If the lever is
briefly pressed and released, the
turn signal flashes three times.
The turn and lane-change signal
can be turned off manually by
moving the lever back to its original
position.
If after signaling a turn or lane
change, the arrow flashes rapidly or
does not come on, a signal bulb
may be burned out.
Have any burned out bulbs
replaced. If a bulb is not burned out,
check the fuse. See Fuses 0 276.
Lighting

Interior Lighting

Instrument Panel
Illumination Control
The brightness of the instrument
panel lighting and steering wheel
controls can be adjusted.
(Instrument Panel
Illumination) : Move the
thumbwheel up or down to brighten
or dim the lights.

Courtesy Lamps

The courtesy lamps come on when
any door is opened and the dome
lamp is in the DOOR position.
151