Display A Side Imaging View On-Screen - Humminbird HELIX 9 Operation Manual

D S I
ISPLAY A IDE MAGING
There are a variety of views available to display Side Imaging data. You can also customize the view by showing or hiding information
(see Customize the Side Imaging View), and you can adjust the sonar settings to maximize the information displayed on-screen
(see Adjust Settings While you Fish). The changes you make are applied to all Side Imaging views.
Display a Side Imaging View
1. Press and hold the VIEW key.
2. Select Sonar > Side Imaging View.
Side Imaging View
Display a Side Imaging Combo View
1. Press and hold the VIEW key.
2. To open a Side Imaging Combo View, select Sonar.
To open a Chart Combo View (Side Imaging and Chart together), select Chart.
3. Select a view to display on-screen. Press the RIGHT Cursor key.
Sonar > Side/Sonar Combo View
For more information, see
Sonar Overview.
NOTE: The available views are determined by your control head model and the installed transducer. See each related section of
the manual (Views, Sonar Overview, Down Imaging Overview, Navigation Overview, etc.) for more information.
Side Imaging Sonar
V O -S
IEW N CREEN
Sonar > Down/Side/Sonar Combo View
For more information, see
Sonar Overview and Down Imaging Overview.
(HELIX SI GPS
70
HELIX CHIRP SI GPS
AND
Chart > Chart/Side Combo View
For more information, see
Navigation Overview.
)
ONLY