Display A Sonar View On-Screen - Humminbird HELIX 9 Operation Manual

D S
ISPLAY A ONAR
There are a variety of views available to display sonar data. You can customize the view by showing or hiding information (see
Customize the Sonar View), and you can adjust the sonar settings to refine the information displayed on-screen (see Adjust Sonar
Display Settings and Adjust Settings While you Fish). The changes you make are applied to all traditional 2D sonar views.
Display a Sonar View
1. Press and hold the VIEW key.
2. Select Sonar > Sonar View, Sonar Zoom View, or Split Sonar View.
Sonar View
Display a Sonar Combo View
1. Press and hold the VIEW key.
2. To open a Sonar Combo View, select Sonar.
To open a Chart Combo View (Sonar and Chart together), select Chart.
3. Select a view to display on-screen.
Sonar > Down/Sonar Combo View
For more information, see
Down Imaging Overview.
NOTE: The available views are determined by your control head model and the installed transducer. See each related section of
the manual (Views, Down Imaging Overview, Side Imaging Overview, Navigation Overview, etc.) for more information.
V O -S
IEW N CREEN
Review Sonar History and Zoom In/Zoom Out.
Sonar > Side/Sonar Combo View
Sonar Zoom View
For more information, see
For more information, see
Side Imaging Overview.
37
Split Sonar View
For more information, see
Compare Sonar Beams.
Chart > Chart/Sonar Combo View
For more information, see
Navigation Overview.
Sonar (2D)