Display Digital Readouts - Humminbird HELIX 9 Operation Manual

Display Digital Readouts

Digital Readout data can be displayed as an overlay, or it can be displayed in data boxes on the views. You can also choose which
digital readouts you want to display. The format and readouts you choose will be applied to all views.
Accessories: The available digital readouts are determined by the installed equipment, so if you connect accessories, additional
readouts will be available.
Format: You can change the digital readout format from the Setup Tab. See Manage your Control Head: Change Digital Readout
Formats for details.
Select the Digital Readout Type
Use the instructions in this section to display digital readouts in boxes or as overlays. You can also choose to hide the digital readouts
completely.
1. Main Menu: Press the MENU key twice. Select the Setup tab.
2. Select Digital Readouts.
3. Select one of the following options:
Boxes
Overlay
Off
Show/Hide Digital Readouts on the Side Imaging View
If you have Digital Readouts set to Boxes on all views, you can hide the digital readout boxes on the Side Imaging View exclusively.
1. Main Menu: Press the MENU key twice. Select the Sonar tab.
2. Select SI Readouts.
3. Select On (show) or Off (hide).
Views
Digital Readouts are displayed in boxes on the view. See the illustration Digital Readouts with
Boxes Selected. You can customize which digital readouts are displayed (see Customize
Digital Readouts).
The digital readouts are displayed as an overlay on the view. See the illustrations Digital
Readouts with Overlay Selected. These digital readouts are fixed and cannot be changed.
The digital readouts will be hidden completely. To hide individual digital readouts instead of all,
see Customize Digital Readouts.
24