Table of Contents
Advertisement
Cleaning Information
48
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Additional Cleaning Information
The following cleaning procedure may be used with other optical
equipment:
How to clean bare fiber ends
Bare fiber ends are often used for splices or, together with other optical
components, to create a parallel beam. The end of a fiber can often be
scratched. You make a new cleave. To do this:
Strip off the cladding.
1
Take a new soft-tissue and moisten it with isopropyl alcohol.
2
Carefully clean the bare fiber with this tissue.
3
Make your cleave and immediately insert the fiber into your bare fiber
4
adapter in order to protect the surface from dirt.
Agilent 8159xB Optical Switch Modules, Fourth Edition
Cleaning Instructions
Advertisement
Table of Contents
