Table of Contents
Advertisement
Getting Started
10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Typical Applications
The following section shows just a few of the possibilities available for use
of the switch modules to achieve better test automation, and test
repeatability.
1 x 2 Switch
Select one of two different sources (different wavelengths) as the input to
the DUT.
1310 nm source
1550 nm source
automated control
Figure 3 Laser source selection
Select different measurement and analysis paths. In the following diagram
the switch is used to select between the measurement path and the
calibration path.
Source
automated control
Figure 4 Measurement path selection
DUT
DUT
Power Meter
Agilent 8159xB Optical Switch Modules, Fourth Edition
Introduction
measurement
and analysis
equipment
measurement
and analysis
equipment
Advertisement
Table of Contents
