Finishing; Door & Screen Operation - Napoleon NZ7000 Installation And Operating Instructions Manual

6.0 FINISHING

USE ONLY A NON-COMBUSTIBLE MATERIAL TO FINISH THE FACE OF THE APPLIANCE.
A NON-COMBUSTIBLE MATERIAL SUCH AS CEMENT BOARD IS REQUIRED FOR THIS PURPOSE.
VENTILATION OPENINGS ARE RECOMMENDED FOR ALL ENCLOSURES.
ABOVE 84" (2134mm) COMBUSTIBLE FINISHING MATERIALS MAY BE USED ON THE FRONT FACE.
6.1 DOOR & SCREEN OPERATION
Insert handle into screen and glass door receiver bottom left corner to raise and lower the door. When not in
use hang handle on tool set.
To swing open the glass door, lift the latch on the right side up and swing the door outward.
TETHER
DO NOT INSULATE AROUND THE APPLIANCE.
NOTE: It is recommended to secure
the cable on the top of the door frame
when removing the door or screen
frames, to prevent the rapid rise of the
doors.
25
EN
W415-1277 / 08.12.15