Mercedes-Benz 2016 SLK Operator's Manual page 201

Resetting values
Press the = or ; button on the steer-
X
ing wheel to select the
Press the 9 or : button to select the
X
function that you wish to reset.
Press a to confirm your selection.
X
Press : to select Yes
X
confirm.
You can reset the values of the following func-
tions:
Trip odometer
R
"From Start" trip computer
R
"From Reset" trip computer
R
ECO display
R
i
If you reset the values in the ECO display,
the values in the "From Start" trip computer
are also reset. If you reset the values in the
"From Start" trip computer, the values in
the ECO display are also reset.
Navigation system menu
Displaying navigation instructions
In the Navi menu, the multifunction display
shows navigation instructions. Further infor-
mation on navigation (see the separate oper-
ating instructions).
Switch on COMAND (see the separate
X
operating instructions).
Press the = or ; button on the steer-
X
ing wheel to select the
Route guidance not active
:
;
Trip menu.
Route guidance active
No change of direction announced
and press a to
:
;
=
?
Change of direction announced without a
lane recommendation
:
;
=
Navi menu.
When a change of direction is announced, you
will see symbol = for the change of direction
and distance graphic ;. The distance indi-
cator shortens towards the top of the display
as you approach the point of the announced
Menus and submenus
Direction of travel
Current road
Distance to the destination
Distance to the next change of direction
Current road
"Follow the road's course" symbol
Road into which the change of direction
leads
Distance to change of direction and visual
distance display
Change-of-direction symbol
199
Z