Siemens Gigaset A580 IP User Manual page 23

First steps
connection
No
"New firmware
New/improved firmware is available for your phone on the Internet. First carry
out an automatic update of the firmware (
been completed (after approx. 3 minutes) the handset's idle display appears
again and the message key f flashes. If you press f, the display shown in
the picture above appears and you can start the connection assistant.
Please note
To protect your phone and its system settings from unauthorised access,
please define a 4-digit number code (system PIN) known only to yourself.
This code must be entered before you can register/de-register handsets or
alter your phone's VoIP or LAN settings.
The default system PIN is 0000 (4 x zero). For how to change the PIN,
£
Page
System PIN:
[ _ _ _ _ ]
Ç
22
Start VoIP
wizard?
Yes
available" is shown in the display...
95.
OK
As soon as the handset battery is sufficiently
charged, the message key f on the handset
will flash (approx. 20 minutes after you have
put the handset in the charging cradle).
¤
Press the message key f.
You will see the following display.
¤
Press the key under
screen.
You will be prompted to enter your phone's
system PIN.
£
Page 98). Once the update has
The active line is marked [----].
¤
Enter your phone's current system PIN
using the keypad.
¤
Press the key below
screen.
The connection assistant is started.
on the display
§Yes§
on the display
§OK§