Siemens Gigaset A580 IP User Manual page 28

Completing the VoIP settings
After the entries have been completed, the handset reverts to idle status.
If all the settings are correct and if the phone can establish a connection to the
VoIP server, the internal name of the handset will be displayed: (example)
Ð
INT 1
Þ
You can now use your phone to make calls via the fixed line network and the
Internet! Callers can reach you on your fixed line number and your VoIP number.
Please note
u
To ensure that you can always be reached via the Internet, the router must
be permanently connected to the Internet.
u
If you have launched the connection assistant via the menu, you will ini-
tially have to press and hold the end call key
for the handset to return to idle status.
u
If you try to make a call via a VoIP connection that is not configured cor-
rectly, the following VoIP status message will appear in the display:
(xxx = VoIP status code). The various status codes and their
fig. error: xxx
respective meanings can be found in the appendix on
You have set up several VoIP accounts ...
You can enter up to five additional VoIP accounts (VoIP phone numbers) via the
Web configurator at a later stage (
network number and the Gigaset.net number, your phone can then be reached
via up to eight different phone numbers. You can assign the phone numbers
to the individual handsets that are registered with the base station as send and
£
receive numbers (
Icons on the idle display
The following is displayed:
u
the internal number, e.g.
u
the quality of the reception signal between base station and handset
(signal strength):
– good to poor: Ð i Ñ Ò
– no reception: | flashes
u
battery charge status:
– = e V U (flat to full)
– = flashes: batteries almost flat
– e V U flashes: charging procedure
V
Menu
£
Page
Page 133).
INT 1.
a
once the entry is complete,
Page
117). Together with your fixed line
First steps
VoIP con-
160.
27